Advanced Excavation And Construction Technology:
The constructions which are executed by the civil engineers highlights the quality performance of the engineer.The use of construction and excavation equipments(heavy machinery) is the another skill of a talented engineer to deploy it on terrain.Such as the deployment of the excavator for creating the foundation of a building.But to use the excavator carefully by watching the marked points on the terrain.
Back hoe excavator CAT 420F
The excavator contains a hoe mounted on the back of the excavator in which it can load heavy amounts depending on the load per cycles of the bucket.And it can also perform the tasks of the excavation such as excavating the terrain to construct the footings.This the multi tasking equipment used for multi purposes.It can work as both dozing and loading purposes.
|
Excavator mounted with a crawler |
The main challenge for the site engineer is that to deploy the excavator in the terrain,If there is the hilly terrain then there should be a crawler installed at a excavator to work in a hilly and mountainous region.And if there is the smooth surface then the wheeler should be installed with excavator as it is easy for the movements.The main advantage of the excavator is that it is detachable which can be mounted in wheeler and crawler.
|
Caterpillar M316 next generation wheeled excavator with advanced hydraulics It provides good performance with 14 percent of more swing torque with overall 10 percent low maintenence cost along with anti drain technology to clean the oil.
|
It contains the engine of 148 horse power with the 2000RPM of its performance in the lower fuel consumption. It is the excavator which is used in most of the construction areas due to its reliability. And it is also recommended by the engineers.
|
Surogate Technology developed of Obayashi Cooperations |
This technology is the very successful because it reduces the time,cost of the user.It control all the construction equipments and machine by the control room which send the instruction to wifi communication devices.And it sends it to the excavator,dumping truck etc.As you can in the picture that the 3D scanner scans the terrain situation and it sends the information to the control room, where it sends the instruction with the help of artificial intelligence, And the excavator after taking the instructions it excavates further and load the material to the dumping truck.Where it takes the instructions from the control room for the dumoing location.
Comments
Post a Comment